Tutorial

• Software: Inkscape (or Adobe Illustrator)
• Level: Advanced
• Subject: Peacock

Peacock Workshop: Standing Peacock | Dancing Peacock | Painting Peacock | Vector Peacock | More …

In this tutorial, we would do a walkthrough of illustrating a vector artwork of a peacock. Much of the techniques mentioned in the other peacock tutorials here would be used.

Drawing

I used GIMP to do a rough work, but you can use any other tool that you find comfortable sketching. See Drawing A Standing Peacock for a detailed tutorial.

After we get the form of the peacock, a little work on the details is done to get the idea of how much detail we want to put into the vector artwork in the end.

Basic Form

At this point in time, I import the PNG file into Inkscape and get the rough outline form of the peacock. If you had done the sketch/lineart on paper, you can scan it in using a scanner and import into Inkscpae.

Make further shapes, to block out the different areas and depth using the lineart as a guide. Take extra care to layer them from back to front. A little bit of planning goes a long way when the amount of detailing is going to be quite complex.

Read the rest of this entry »

• Software: Inkscape (or Adobe Illustrator)
• Level: Intermediate
• Subject: Genie Lamp

By the end of this tutorial, you would be able to create a vector artwork of a Genie Lamp. You should be familiar with the tools of Inkscape or any of the other vector editor you use (like Adobe Illustrator or Corel Draw).

Base Shape

Use the ellipse drawing tool and create two of them one below the other and overlapping. Align them so that their centers are exactly above each other. The blue ellipse is the base shape of the main lamp body. The red one would become the stand of the lamp. Create two more ellipses (green) on either side of the red one. Use the subtract operation to chop of this area from the red ellipse to get the base shape.

Use the pen tool to create a roughly trianglular shape on the left (or right - your choice). Note that the tip of the triangle pointing outside has been chopped off and it is actually a four sided polygon (green). Use the node edit tool to curve them as shown above.

Create two more smaller, concentric ellipses and tilt them a bit. Subtract the inner ellipse from the outer.

Read the rest of this entry »

• Level: Intermediate
• Subject: Horse Head in profile

This tutorial should get you going on drawing horses - the head specifically.

You should be able to reproduce the results either digitally or using pencil, pen, paper and a good eraser. If you would like to study the results, you can download it at the end of this tutorial.

Basic Shape

First, try to imagine and breakdown the seemingly complicated head of the horse. You will notice that it is sphere for the head, a cylindrical protruding to the muzzle and another much smaller sphere for that area. On the profile view, it becomes circles and a cylinder. The neck too is a cylindar and on profile, it would become a rectangle - but to make it interesting, I twisted it a bit.

With the guide in your minds eye, draw these rough shapes to gain confidence before moving on to actual sketching.

Read the rest of this entry »

• Level: Intermediate
• Subject: Tutorial

This tutorial, would be on a similar technique as the earlier tutoril on drawing a fish. The subject is a little bit complicated - that is the difference. But inspite of that, you will notice that even this subject can be approached with the ’simply and build over’ method of sketching and drawing.

You can either work on pencil, eraser, pen and paper, or on digital medium using GIMP or Photoshop. You will be able to download the digital file either as XCF or as PSD for your study. The different steps are in different layers.

Rough

The tortoise basically consists of the carapace, the limbs and the head. The tail too, but it is not visible from the angle I will be drawing it. You will see that my ’simple’ shapes are not that simple as compared to the earlier fish tutorial. But if you squint your eyes, you will notice that they are all still the basic shapes. The carapase is an oval, the head is a rounded rectangle, the limbs are triangles. After a while of sketching you can actually imagine these guides as you draw.

If you feel uncomfortable with the slightly complex shapes, you can start from the basics of simpler shapes and build to this point.

If you are doing this on paper, rember to use a HB or lighter pencil. Put in the strokes lightly. On the computer, do the rough lines on a layer called ‘Rough’.

Sketch

Over the rough, you will be sketching. Again, imagine the below guides. The red and browns are marking the eyes, and creases of mouth and neck.

The blues are the nails/claws. The green is the segmentation of the shell/carapace. If you feel you are uncomfortable imagining the squished brick like structure, draw it out lightly over the rough.

Start sketching over the rough with darker pencil like 2B or 3B, trying to hold true to your rough work.

In GIMP or Photoshop, create a new layer called ‘Sketch’ above, and reduce the opacity of ‘Rough’ layer to 30% or 50%. Take a pressure sensitive brush and start drawing on the ‘Sketch’ layer.

Do not worry if the lines are not clean, that is what we will be doing in the next step. The focus here would be to make the form solid.

Lineart

If you are working on paper, run the eraser over the drawing lightly, to make your sketch light. Your rough work should have disappeared. Take a pen and draw the lineart over the sketch. Once you are done, erase all the pencil markings.

On the digital end, turn off the ‘Rough’ layer, bring down the opacity of the ‘Sketch’ layer, and create a new layer called ‘Lineart’ or ‘Basic Lineart’. Use a simple brush/inking brush, with pressure sensitivity turned off for opacity, and turned on for size.

Once the basic lineart is done, on the paper, go in and thicken some of the lines. On the digital medium, you can either create a new layer, or work on the ‘Lineart’ layer itself, and using a thicker brush than the previous, thicken some of the form defining lines - like the carapace/shell, the head and neck, and the limbs.

Do not thicken each and every line, that defeats the purpose of keeping variation.

Download: Draw A Tortoise - XCF | PSD

Download XCF version if you use GIMP and PSD for Photoshop. All the steps along with the guides are placed as different layers. You will need to switch the visibility on and off on those layers.

Drop in a comment below if you would like some drawing tutorials on specific subjects (or you can contact me).

If you liked this tutorial, please subscribe to KalaaLog.com feeds (or use the email subscription form above), and pass this link to your friends.